Your cart is empty.
Your cart is empty.Product Description
Sutekus 23 Gauge Pin Nailer 15/32" To 1" Pneumatic Air Pin Nailer Gun For Woodworking Applications
Sutekus Pin Nailer is compatible with 23 gauge headless micro pins which produce near invisible holes. Its side knob can adjust magazine that accepts standard 23 ga. headless pins sized 15/32", 5/8", 23/32", 3/", 7/8" and 1". Whole package comes with safety glasses23G Pin Nailer, 1/4-inch NPT male plug, replacement piston driver, hex bar wrench, carrying case and free nails. With lightweight and compact design, Sutekus 23G Pin Nailer can be used in a variety of applications including cabinets, paneling, small moldings, trim, glazing bead, craft work and picture framing.
Key Features
Large Capacity Magazine
Magazine capacity of 150 pins reduces downtime and offers convenience to the user.
1/4" Air Fitting
Easy and quick adapter to compressor.
Tips: It's slightly thicker in case of air leaking, please try to push a little harder until it locking with compressor hose
Narrow Nose Design
Narrow nosepiece tapers down to contact point for clear line-of-site.
Adjustable Magazine
Side magazine knob adjusts for 15/32", 5/8", 23/32", 3/", 7/8" and 1" fastener lengths.
Wide Application
Sutekus 23G Pin Nailerl is an ideal tool for cabinet makers and installers, furniture builders, and mantle builders. It's perfect for light fastening and clamping applications including, but not limited to, small trim and small decorative moldings, cabinet crown molding, raised panel doors, rope and bead molding, mantle building, and wood joining.
Package Content
- 23G Pin Nailer (with Air Fitting) x 1
- 1/4" replacement piston driver x 1
- 15/32" pin nails x 200
- 3/4"pin nails x 200
- 1" pin nails x 200
- Hexwrench x 2
- Carrying case x 1
Waterickson
July 10, 2025
I was using 18x36 floor tile for a backsplash. This pin nailer nail it!
John J. Eckert
June 22, 2025
I am an artist and build my own picture frames. The pin nailer work real good on very thin pieces of wood.
LB
May 29, 2025
Bought this to put up some Luan panels. Nice compact design appears to be well built and serviceable with included spare parts. Only issue which was minor that it does not have a safety function that requires you to push the tool into the wood for it to fire. In other words it can fire in air. Note don't point it anyone..Easy to load. Just need to adjust for pin size hook up the hose and off you go.Does not leave a dimple like some other inexpensive nail guns.Best use for 1/8 or 3/16 paneling.For the price i paid it was worth it only if it us used for one job but i dont think that will be the case if I keep lubricating it before and after use.
lyzz
April 10, 2025
Sort of does the job -- just medium quality. OK for the price.
Customer
February 23, 2025
I bought this one to replace my HF pin nailer. It comes with a box and spare parts. I can shoot 20 nails on arrival out of the box without any errors. so far so good.With a very similar or even cheaper HF price, I can not complain about its quality.
Knucklehead62
February 18, 2025
Get what you pay for; Not the easiest operation to understand. No instructions on how to load, but the gun does the job.
tntileworks
February 16, 2025
Gets the job done no problem. Couldn't be happier, functions as well as other models which I have used before which cost ...you know 5x as much! Came with a repair kit as well, can't lose with this one.
Larry in FL
January 30, 2025
Had hopes, but this thing turns out to be trash-bound. When it arrived, I shot a couple of pins to be sure it worked. Then it sat for a few months...pulled it out for a project and it shot ONE pin and then refused to shoot anymore. Disassembled it, but no luck...the unit acts like it is working, with the piston cycling, but it will not pick up a pin to feed...except every so often!!!!Going into the trash. Take my experience as a warning!!!
ARDE
January 8, 2025
It works and very reasonably priced.
Recommended Products
$324.99
$ 99 .00 $99.00