Your cart is empty.
Your cart is empty.Remember when you had four different tools all in one nailer? Go from a brad nailer to a stapler to a flooring gun all with the WEN 4-in-1 18-Gauge Pneumatic Flooring Nailer and Stapler. Drive 18-gauge brads anywhere from 5/8 to 2 inches in length or 1/4-inch narrow crown staples anywhere from 1/2 to 1-5/8 inches in length. Attach the adjustable spring loaded flooring head to angle your fasteners at a 45-degree angle, making this the perfect companion for carpenters that need versatility on the job. With an operating pressure of 60 to 100 PSI and a 1/4-inch NPT air inlet, simply hook up your favorite air compressor and start nailing. The onboard depth adjustment wheel controls how deep the fastener shoots into your workpiece while the quick-release nose makes it easy to clear jams in the middle of a big job. Our lightweight design along with the rubber-backed grip prevents fatigue during long jobs. Combine that with the 100-nail capacity magazine for a nail gun that makes easy work out of crown molding, tongue and groove flooring, trim work and more. This package includes a carrying case for storage and transportation, two hex keys and oil. And, because it’s a WEN product, your 4-in-1 18-Gauge Flooring Nailer comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN. Remember when you could take on the entire job with one single nailer? Remember WEN.
Seaman
July 29, 2025
The Wen stapler is an incredible value. I was surprised that a flooring stapler 1/3 the price of Bostitch would perform as well as this one does. I had looked at that brand first because I rented one years ago and had a big stock of leftover staples in their unique size. It's not exactly 1/4" crown, and maybe it would work interchangeably, but I didn't try.I installed about 300 square feet of flooring in my living room using about 3,000 staples without a single jam. I only had one double-fire which was my error for letting the tool bounce.The depth adjustment took me 3 tries to dial in, as the instructions were not entirely clear on how to set it. I found that I needed to let both of the moving pieces float while I set the stapler firmly in the groove of the flooring, then rotated the stapler away from me until the bottom plate laid flat on the floor, but not so far that the back of the top plate rose up from the flooring. Once the screws were set and tightened as hard as I could do it by hand, they never loosened on their own.I wish someone would figure a way to articulate the tool body to get the last couple rows of flooring stapled- this is an issue with any brand of stapler- you can't staple the last 3 rows closest to the wall. I used a brad nailer for the 3rd row, rotated parallel to the flooring and was able to reach the 45 degree angle required. The next row I nailed straight down through the tongue, and the final row I trimmed off the bottom groove, glued to the tongue and face-nailed very close to the wall where the trim would cover it.
Kyle
June 30, 2025
I got this as it was one of the cheapest nailers that I could get that was to put in my hardwood floors. I put in 1500sqft of flooring and this thing still works like new. Surprising quality for the price. Would 100% recommend for a someone doing a flooring job on there own.
Darrin Cook
June 7, 2025
This is the tool to buy if you are putting down some 3/8" engineered hardwood in your house. This is not the tool to buy if you are going to do that for a living. It works well for the intended application. The adjustment knobs for the cleat come come loose constantly, making it difficult to set it and forget it. The trigger is also pressure sensitive, as in if you don't pull it fully, it will fire, but not set a staple, REALLY annoying in thin material. The difference between this tool and a professional level version is noticeable, but if you are looking at this, its probably to do with price and you would be ok to not be able to move as fast as a professional gun will allow. As long as you pay attention to the cleat adjustment and fully pull the trigger, not just tap it, it sets the staples very well. Its perfectly adequate for its intended purpose. If you are going to use it daily, there are better options out there. I have put 10k staples through it, no jams at all, and it shows no signs of any issues in terms of performance or appearance. If the cleat would stay put, it would be a 4.5, and if the trigger would only allow a full shot, you have a 5 star tool. Overall, its a very good tool with minor issues. I would not hesitate to recommend it to anyone.
Julie A Dalsing
May 9, 2025
Works great
J.Pedraza
April 15, 2025
The media could not be loaded.
RORO
April 10, 2025
This is an awesome product for the money . Fast shipping !! Would buy again from the seller
Kayla Rumrill
April 10, 2025
I bought this to install 5/8" thick tongue & groove ceiling boards.This is the max thickness the shoe can be adjusted to. I installed about 550 square ft of ceiling boards and the only issue was occasionally it would fire 2 staples. Operator error. LolNot holding the gun tight enough and bounce caused trigger to pull again.I used 1-1/2" stainless steel staples. Not one jamb. I would not hesitate to buy this again.
linda
March 14, 2025
After much research..... i bought this not expecting much at all from it I needed it to last long enough to complete one projectI had 500 sq/ft of engineered hickory flooring to install (1/2")this thing worked flawlessly for the entire project Not one single misfire I missed a couple of times, but it wasn't the guns fault .... User errorThe shoe did come loose once or twice but not a big deal just re tighten and keep on goingVery easy to use and set up Anyone can use itFor the money you can't go wrong Very Pleased with the purchase
Carlos
February 27, 2025
I used this tool to fasten 3/8" thk. engineered wood flooring with ease, I should have bought this tool sooner, I'm very satisfied with the result and it's 4 in 1 tool not just for fastening floor.
amy Martin
February 11, 2025
We purchased this floor nailer to install engineered hardwood throughout our home, we have completed about 500 sqft so far and the nailer has work great!Very easy to use, love the 4 in 1 design. We can use for other jobs around the house once flooring is done.It is exactly what we needed and you can't beat the price!
Adana Construction Ltd
January 9, 2025
The nailer worked extremely well for installing tongue and groove soffit!!Great purchase…
allan w.
December 8, 2024
Did over 600 sq ft of engineered oak floor with 1 1/2 inch staples and not a single misfire. Because the shoe is removable I also used it to secure roof sheathing on my 13×16 deck roof. Cost was equal to 3 days stapler rental @ HD. Because rooms were furnished it took a week and a 1/2 to lay the floors with no pressure to return a rental.
fitzyboy
November 15, 2024
Worked great for the job it was bought for, very light, not for heavy use but great for someone that has small jobs to do around house. Found stapling head for groove and tongue boards worked great but flimsy. I will get my money's worth out of this 18-Gauge Pneumatic Flooring Nailer and Stapler.
Recommended Products
