Your cart is empty.
Your cart is empty.Product Description
Toggle switch and adjust knob
Application: siding, fencing, sheathing, roof decking, furring, exterior trim. subflooring. exterior deck, strapping ect.
Operating air pressure: 70-120 PSI
HBT HBCN65P is a pneumatic coil siding nail gun using compressed air as power source.
It is specifically used for installation of cement board and wood siding. No matter what type of siding you're working with, HBCN65P Coil Siding Nailer will take care of the job.
This tool is designed to operate on clean, dry, compressed air at regulated pressures between 70 and 120 PSI(Pounds per Square Inch)
This siding nailer is designed to install 11 gauge, 15 degree 1-1/4"~2-1/2"(32-65mm in length) wire collected nails or plastic collected nails.
richard squyres
July 29, 2025
I normally buy the more expensive tools, dewalt, Klein and so on but thought I'd take a chance after reading the reviews for this nail gun. The gun arrived quickly with its own case and included oil, safety glasses, instructions along with a few hex keys. The gun seems of proper weight, not cheaply made and has a swivel air nozzle tip which I didn't expect but comes in handy. I oiled her up, loaded her with nails and away we went. So far I've shot approximately 1000 nails and the gun has NOT jammed one single time. Every nail shot to the set depth without fail. Not Dewalt, Paslode, or Hitachi could have done a better job. Considering this gun is 200 bucks cheaper than those models I'll call this one a win. Time will tell if this gun will have the longevity of those more expensive name brands but from first impressions im positive it will.
Ryan N.
June 25, 2025
This was a good find for a good price. I used it to install LP siding and trim on my old shed. It does double fire occasionally, and isn't terribly consistent at maintaining a depth setting, but overall it served its purpose quite well for the price! I've only run about 200 nails through it thus far but NO JAMMING at all!! My only suggestion would be that a hook be added to allow it to be hung from my tool belt or a ladder. Overall I would recommend it for any DIYer on a budget like I am.
John P.
June 8, 2025
I had been using a framing nailer for Hardie plank and it was causing several problems. I bought this one due to the price and the limited work I had to do and it changed things greatly! First it is easily adjusted so I had few overdrives. It is lighter and I did not have to continually reload the gun. I love it and the work is going much faster. The nails are actually cheaper and easier to find than 2" framing nails. The case is an added feature that makes transporting in my vehicle easier too. There are some plastic parts that concerned me, but after using it for several days I think this tool is fine. I also like the size and balance compared to my framing gun. Would buy again and recommend.
R/K B
June 4, 2025
I tried several , but this one with the depth adjustment is the way to go . Solid unit, I've run hundreds of nails through it without issue . Good value and good item for the DIYer
Gary Smart
June 3, 2025
Bought it because it had decent ratings and the price was right. That was the good part. This tool misfired and jammed so many times that I lost count. A job that should have taken an hour, took almost 3 with all of the malfunctions. It fired multiple times with a single trigger squeeze on more than one occasion, even though the selector was in the single shot position. It even had a nail upside down in the chamber on one occasion. Save your time and frustration, buy a better quality gun.
JP
February 23, 2025
This is perhaps the most powerful nailer I've ever used. It took several minutes to turn the pressure down enough to Not over penetrate. The first shot was buried a 1/4" deep. Wow. When it was adjusted it worked perfectly. The single fire/ touch fire switch is a sweet bonus. I fired about 50 test nails into an old 2x4. Flawless.Recommended!
Customer
January 14, 2025
For the most part nailer works well. For some reason though I keep getting double taps with one squeeze of the trigger. I'm pretty experienced with nailers so don't think it's my technique. Depth setting works well. No jams in first 500 nails. Nice job.
tkd5dan
December 18, 2024
I have to admit I’m a bit of a tool snob. I typically buy the big name brands. I hadn’t heard of this brand but decided to try it because I had a small, one-time project. I am amazed! This siding nailer has fired over 400 2.5” nails (and counting) without a single misfire or jam. The depth control is accurate and responsive. It comes with Allen wrenches for maintenance, oil, protective glasses and hard case, all for $139! It will hold its own with tools costing three times the price. I highly recommend this nailer for siding projects of all sizes.
Jeff Knoll
December 11, 2024
Great gun , no issues so far, highly recommend
Marc Langlois
November 22, 2024
Excellent
Recommended Products
$162.00
$ 68 .99 $68.99