Your cart is empty.
Your cart is empty.The Freeman P4FRFNCB Pneumatic Framing and Finishing Nailer and Stapler Kit with Bag (4-Piece) contains 4 of the most commonly used nail guns for renovation and home improvement needs. The durable air powered framing nailer, brad nailer, angle finish nailer and narrow crown stapler in this tool set can tackle projects from framing and wood fencing to window casing, cabinetry and trim work. These powerful pneumatic nail guns are built to increase productivity for DIYers around the house as well as professional construction contractors at the jobsite, saving time and money. The Pneumatic Framing and Finishing Nailer and Stapler Kit includes a durable canvas bag and is covered by Freeman's 7 Year Limited Warranty and 90 Day Wearable Parts Warranty.
iDealShopper
June 29, 2025
Price can't be beat for a set of 4 of the most used nail guns at $183. If you had to purchase each of these separately it would total over $300+.I have attached some pictures of the actually item and any accessories it came with.The FRAMING Nailer is huge and the quality is very good. It uses 21 Degree naile up to 3 1/2 inche. It fires fine and you can remove the rubber to expose the teeth when working in situations where you need it to grip on the subject for nailing. Depth of shot can be adjusted.The FINISHING Nailer uses 15 Guage 34 Degree up to 2 1/2 inch. Depth of shot can be adjusted. Has a rubber tip and fires fine. The quality is also very good.The FINISH STAPLER uses 18 Guage up to 1 1/4 inch. It also has a rubber tip. Fires fine and deep adjustable. Quality is good.The BRAD NAILER uses 18 Guage up to 1 1/4 inch. Also has a rubber tip and deep is adjustable. It fires fine and has a quality feel.This combo package comes with a bag to hold all of the 4 nailers. The bag has a few pockets inside to store nails and also dividers to store each of the nailers.Freeman also included EXTRA replicable tips, small amount of oil (I recommend you order a 8 oz or larger oil).Overall this is a SMART buy for the DIY. If you used them on occasional projects. Not sure if these will held up to the contractors out there that pushes their tools to the extreme. It might.
Patrick
May 29, 2025
I love these nail guns. I started a home addition/renovation and kitchen project, and these nail guns have been at the center of my toolset for the whole project. I have used them all, and here is my take on each of them.- Framing Nailer - pretty stout gun. This one has gotten the most use. I have driven 3" and 3 1/4" Galvanized, 2" and 3" Stainless nails. I have used this gun to to 2x6 framing, set sub-floor, and other various nailing tasks for which I needed framing style nails. This gun had driven over 2000 nails for me, and misfired less than five times. I have never had a jam. The only downsides I see to this gun are that calibrating it still seems a little mysterious to me. I usually have to fire a few nails and adjust the air pressure to get it right, and I also don't like the clean up required with the plastic collated nails. I have also not had as much success with toe-nailing as I would like. That could be operator error. Overall, a great gun - consistent performance.- Finish nailer. I've hung tongue & groove ceiling and 1x finish lumber with this gun. Overall, about 1200 nails. Excellent performance. In all those nails, I have only had to set 10 or so nails after nailing, and they were in much harder material (engineered beam). No misfires. very consistent performance. Early on I had to clear one or two jams, and they were easy to clear.- Brad nailer. I love this little gun. I have used it to nail down flooring in difficult corners and hang trim. It sinks the nails consistently every time, and they are almost invisible. I keep thinking of all the wood putty I won't be using now, and I almost get giddy.- Stapler. This gun I have less than all the others. It seems to perform just fine, I have just not found as many uses for it. When I do, I suspect I will once again be reminded of the best tool purchase I've ever made.FYI - I use a California Air Tools Compressor which I bought on Amazon, which I will review separately. Also, I liked these guns so much, I bought a Freeman 18 gauge flooring nailer, which is a great tool which I will review separately.
Alexandra
May 15, 2025
I have put quite a few hours on the Framing and Finish nailers. Very impressed especially given the affordability. No issues encountered. My only reason for not giving 5 stars is because the framing nailer struggles to fully drive a toe nail angle.
Public Name
March 17, 2025
I have been looking for the right set of nail guns for me for quite a while. I like to buy an item that I will not have to replace, and if I do it's because I used it so much and so heavily that it was time for it to be replaced. I can tell these tools will meet that expectation.Before I ordered this set, I read every single good and bad review on Amazon. What I saw was a lot of amazing reviews about the quality of the tool and the company's customer service. And on the handful of less than perfect reviews, I saw where the company that handles the warranty contacted the customer and ensure them that they will make it right. You just don't see that from many companies, so that was enough to hit Buy.They came in last week and I used them over the weekend, my wife said I played with them. Each of the tools was easy to use, and pretty easy to adjust the depth. I had a little bit of trouble loading the nails into the finisher, but it was just my lack of experience with the tool. "Not quite a Pro Tip", line the nails up on the back of the receiver when pushing them in. I tried lining them up on the front, didn't work quite well. As for psi, I had read that a lot of people were running around 90 psi on the framer, and I was also able to. I was actually able to run 80-90 on each of them and they all cycled perfectly.Also, the bag that they come with is very heavy duty and has a spot for each gun. I plan on building a rack to hang them from above or beside my work bench, but I look forward to using the bag when I go to friends’ homes to help with projects.If you are looking for your first set of nail guns or you need to replace an older one, buy these. You won’t be disappointed, and you will save a ton of money over a lot of other brands, that now that I have handled these, I don't think the others meet the Freeman quality.
Derek
March 9, 2025
Everything is very solid and well-made, very sturdy. I am using 3" nails in the framer and it works great. I can see this lasting a long time!
Coolin
March 5, 2025
I have used framing nailer for about 2 weeks, I have not found any issues. nailer stopped shooting if it has 3 or 4 nails left in magazine, vs 7 nails in manual. Overall it performs very well. I have not got any jam yet.also tried stapler: all work perfectly.
Slicon
February 27, 2025
DEBI COMPRAR OTRO SET YA QUE EL PRECIO NO SE PORQUE PERO FUE DE 2381 PESOS POR EL SET DE LAS 4. AUN ASI EN EUA CUESTA 189 DLLS. RECOMIENDO MUCHO ESTA MARCA LA VERDAD NINGUNA FALLA Y YA TENGO MAS DE 5 MESES USANDOLAS.
Elrodri
February 24, 2025
Buenas pistolas de excelente calidad, no baja el desempeño de los golpes. Son pesadas y terminan cansando muy rápido, pero una vez que te acostumbras hacen muy bien su función
sharon hayes
February 13, 2025
Purchased this set for my hubby for christmas and he loves them.
Melsgear
December 24, 2024
The framing nailer works fine.Can’t nail the 2 inches nails if there is only 2 in the slot. You have to add another set to use the 2. But then the last 2 ones still are useless.The 3 1/4 inches nails are great. It got stuck a few times: a nail was blocking the slot everytime. Easy fixes. I used the BOSTITCH RH-S12D131EP Round Head 3-1/4-Inch x .131-Inch by 21 Degree Plastic Collated Framing Nail.Hard to fit in small spaces. Easy to set for different depth.Still have to try the other nailers. I’ll update my review :)
Recommended Products
$57.66
$ 30 .99 $30.99