Your cart is empty.
Your cart is empty.Designed to increase installation speed of popular engineered wood panels while meeting manufacturer’s specifications. - Fits several siding nailers with concentric safety noses. - Provides the correct nail placement consistently while reducing reliance on acute eye-to-hand coordination. - Allows variability in gun angle while still landing in the “best practices” fastener zone. - Spring loaded pin allows normal use of the nailer. - Anodized finish - Hex key included - Stainless steel set screws. *** Note: While other nail guns/nailers may be compatible, listed above are the only ones known to fit ***
CSM
July 2, 2025
You don’t have to make your own jig or measure where you’re going to nail to get the proper distance from the edge of the board. This makes it a no-brainer. Love it. With this on your siding nailer and the gecko gauges the siding courses fly on.
Oscar Calderon
May 12, 2025
Fit perfectly on my Dewalt nailer DW66C-1. Definitely allowed me to move quickly through my lap siding installation.
Placeholder
April 23, 2025
They have a couple different models that fit different nailers. If you have a Metabo or Hitachi coil nailer, the fit is different between the 2 different models. Check to make sure you are ordering the right size for your nailer. Otherwise, the product is great and does exactly what you expect.
Frank M. De Nardo
April 5, 2025
Installed smart side lap siding with no issues, worked great never fell of the bostich siding gun. Was a little snug putting on gun but not complaining about it!
Customer
March 29, 2025
Does make nailing quicker and easier, and keeps nails at same location all across siding. 4 out of 5 stars only because it was a very tight fit, had to file lit some on gauge and then use rubber mallet to get it on.
Mr. Lopez
March 8, 2025
These are a great attachment for production siding. I am a contractor and always try and follow the manufactures instruction for installation. There is a specific nailing location of the 2 main types of lap siding and 'high' nailing can void the warranty. Use this on your nail gun and 'set and nail'. I have both sizes and will use the FC on EW siding when I want a lower nailing with a reduced exposure. i.e. 6"- 612NOTE: see photo. I did have the small cap 'pop' off yesterday. It actually landed on the top edge of the piece of siding 2 stories up and the spring behind it was still in the pin. I put the piece back on and tapped it on with the hammer. I have put up a couple thousand feet of siding with this gauge. You should treat it with care and it will last. I bought 2 more this week so I am not left without one. Great product.
Matt
March 4, 2025
Ease of use
newtexan
December 9, 2024
Worked great for my LP siding project. Sets the spacing perfect every time. Well worth the price to make sure your siding is installed according to manufacturer specs. The ew-2 worked well on my PCN 65 nail gun. I needed the larger diameter for proper fit.
Recommended Products
