Your cart is empty.
Your cart is empty.Product Description
PRODUCT OVERVIEW
- Deliver more full-power shots than comparable one by advanced impact drive motor
- Drives 18 gauge brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1" for your needs
- Multi-safety design: On/Off power switch, Safety Contact and Trigger
- No-mar nose tip, reduce damage to wood
- Features a quick-release mechanism
- Easy sliding load magazine
- Power adjustment dial and Over-mold soft grip
- Great for Carpentry DIY, picture framing, upholstery installation, installation of insulating material/fabrics/leather, pet house DIY and more.
Warm Tips For Usage:
1) Two-Handed operation will assist in better penetration strength!
2) Pls use a shorter and 12 gage extension cord at the least if needed.
For any suggestions, please feel free to let us know more deatils and we will do our best to serve you.
New Upgraded, More Power
New Version NEU MASTER Electirc Brad Nialer NTC0110-US with its Innovative spiral-drive mechanism, delivers more full-power shots and better penetration strength than traditional solenoid machine. And this compact upholstery staple gun with ergonomic grip is super lightweight (only 2.46lbs) so you can take it anywhere to get the job done.
The Reason that Choose NEU MASTER Upgraded Electric Brad Nialer NTC0110
Safety Usage -- On/Off switch and Contact Safety Design requires that the nail gun can only fire when contact safety is pressed on the working surface fully in order to avoid intended firing or damage caused by misoperation.
Step 1 - Turn on the On/Off switch
Step 2 - Press the contact safety firmly
Step 3- Squeeze the trigger to active the brad nailer
Need More Help, Please Let Us Know!
!!! For Better Performance
1 ) The two-handed operation will assist in better penetration strength.
2) Make sure the workshop voltage is not less than 110V.
3) Highly recommended NOT to use extension cords as it will cause penetration loss.
Greatly Ideal for A Variety of DIY Projects, Come for it!
AMac
July 5, 2025
Not gonna lie...I was shocked that this electric nailer worked as well as it did!! It's pretty light weight and works well for smaller to medium jobs. We used it up to 1/4" plywood with no problem. I didn't noticed the size of nails mentioned, so I did the easy thing and asked the guys at the hardware store. So easy my 13 year old tried it out.
Doug Roth
June 22, 2025
I would recommend this product if you don't want a pneumatic nailer, shoots 1 1/4" staples perfectly. 100% Satisfied with this nailer
Customer
May 12, 2025
When doing any DIY or Home Projects that require this tool I know to expect frustration to be about 10x what it should be because this tool is complete junk. It jams after almost every time the trigger is pulled, adding countless time to any project. On top of that, when it does actually work, it does not countersink anything, so I am still nailing in my brad nails if this POS actually fires. I am putting up picture molding today and would have been done in 1/10th of the time had this tool actually worked. Just avoid this, it may seem like a good deal, but you will regret the purchase when your project is held up due to this thing not working.
Chris
April 27, 2025
For the price, this isn't bad. You get an ok amount of staples and nails. The only issue i've had is, unless you put the item you are nailing against a hard surface (concrete, hard wood), it will NOT drive all the way into the wood. I was working on an item that had small legs and since it was standing, when I drove the nail in, it stuck out about 4mm.Otherwise, a cheap tool that does do a decent job..
Lobrien
April 5, 2025
I got this in order to install a runner on my oak stairs with crown staples. After reading review I was a little concerned about a lack of power, but due to the price decided to give it a try. Some previous reviews mention the importance of using a short extension cord and outlet whose circuit breaker isn't using any other power.Very true! I started with a heavy duty outdoor 12ft long extension and staples would not fully penetrate the wood treads, realized I did not need the length and switched the extension to a light duty indoor 4ft extension and what a difference! Staples went all the way in (once every 10 or 15 shots one would need to be hammered a tad- but I expected that with the cost...and it may have been technique). But I would not recommend if your job will be a significant distance from your outlet- I am guessing 10-12 feet (a 4-6ft extension) is safest.
Bonnie
April 4, 2025
I have air nailer which is much more powerful but each time I need to power up air compressor. Thus want to try this electronic one, just plug in, very convenient, but the power is too weak, even adjust to deepest depth, it won't punch fully into even the soft old wood. Weight is ok.
Big Bear
March 8, 2025
Electric brad nailer for a project I had planned. Well right out of the box it started jamming. When I went to disassemble the head (easy enough to do) it literally exploded sending parts all over the place. What I didn't know was I should have removed the brads from the magazine before disassembly. The spring force blew all the brads and head parts out of my hand, so I wasn't able to observe how it was put together or how many parts were involved. Finally managed to figure it out after a couple of errors in reassembly. Even after this the gun continued to jam and shoot multiple brads at once causing more jams. By now you are probably why my 5 star rating. This is the reason. Through all this I contacted Spartatools csAnd they consistently got back to me within 24 hours. They walked me through aal the procedures and even sent pictures of correct assembly. We then swapped a couple of emails to figure out the jamming issue, again with pictures shared back and forth. In the end we couldn't get it figured out so they said they would send me a new unit and don't bother sending the old one back. Two days later the new gun is here and working well. I have been shooting 1.25" 18ga brads into 7/8" boards and using the proper two hand method it sinks the brads flush on the highest setting. Good tool.
CR
March 4, 2025
I got this because I don't have an air compressor and my home improvement budget is really tight. I needed a nail gun for some odds and ends and this barely is worth the money. With 1 1/4 or 1 inch nails about a quarter inch is left sticking out of half inch oak. I had to go over every nail with a nail set. Annoying, but not completely unexpected based on some of the other reviews.It works just well enough that I won't return it. Easy to use, cheap, and just not strong enough to drive nails into hard wood. If you plan to use this with pine or another soft wood this might work better.I'll be using it on some softer wood soon so I'll update this afterwards.I should have known better than to cheap out on a power tool and just waited till I could have gotten something better.***Update***I took me a while, but I did use these on some softer pieces and it did work much better. This tool is useful enough for me that it'll have it's place in my toolbox, but I will definitely look into a more heavy duty unit in the future.
LBK - Armagh
February 6, 2025
I needed a Nailgun for home DIY tasks and did not want to spend a fortune. This seems to be exactly what I have been looking for. Not too heavy to use and a very well-designed shape for comfortable handling. I can see that this would be perfect for upholstery tasks and framing, skirting board attachment and light wooden cladding/or repairs. My first job will be to clad a garage wall with pallet wood!The Nailer arrived with brad nails & staples supplied. However, I did order additional brad nails in the maximum size18gu x 32mm. It was quite simple to add the cassette of nails to the Nailer and set the strength required to fire these into wood. Have tried it out and it is working well & is comfortable to use. The Nailer will have no problem nailing pallet wood to batons attached to my garage wall!Great wee tool for anyone needing a starter Nailer/stapler!
Gabyg
January 16, 2025
De todas las opciones que revisamos, nos pareció la mejor y probando la puedo decir que no nos equivocamos. Sumamente fácil de utilizarse, aún cuan no se tiene un buen manual, los diagramas son suficientes. Si se siguen las instrucciones los clavos y grapas quedan muy bien. Los puntos de seguridad están muy bien. Relación costo calidad excelente.
LaMo
December 15, 2024
Schnelle Lieferung und für meine Zwecke gut zu empfehlen. Ich hefte damit schnell 18 mm starke MDF Bretter an andere MDF Bretter, welche ich kurz davor verleimt habe und dadurch zusammenpresse. Nagellänge 32 mm auf fast maximale Stärke eingestellt, wird sehr bündig. Wenn das Gerät lange hält, ist alles perfekt!
claude
November 14, 2024
Pratique pour petits projets.
William S.
October 24, 2024
It is unusual to purchase a tool that is reasonably priced and functions in the way it is advertised, along with an after sales support service second to none from the manufacturer. I am writing about the NEU Master NTC0040 Heavy-Duty Electric Staple/Brad gun from SPARTATOOL. The gun is both easy and safe to use for someone with a minimum amount of experience and overall a pleasure to use.
Recommended Products