Your cart is empty.
Your cart is empty.Product Description
Teflon tape
For better sealing, we recommend using Teflon tape for pipe fittings
Product Material
Fittings are made of 316 stainless steel for better abrasion and corrosion resistance and are commonly used in machinery, petroleum and other fields.
Product Details
Both ends are used to connect pipes of different diameters, for connection, termination and flow control.
Easy To Use
The deep thread design makes the accessory better engage with the object to enhance fixation.
About This Product
[Please note] When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness)
TAISHER PACKAGING
TAISHER, established for the development of e-commerce business, mainly serves the American industrial market, is committed to producing industrial-level high-quality products. Has a professional manufacturing team, design And supporting various hardware tools, pneumatic tools, auto parts, including air hoses, high-precision pressure gauges, drills, can presses, etc.
Jenco
July 12, 2025
I used the reducer bushings on a pcp air fill whip to add bleeder valves . It worked perfect . The bushings were good quality . I would definitely purchase again
Viking Lawyer
July 6, 2025
I keep a few of these on hand ( usually brass ones ) as I end up doing a fair bit of refrigeration plumbing to keep my equipment working. Having these on hand is a good thing in my case. What ever your use case, I think you'll be happy with these. They are very strong, quite a bit stronger than brass.
rhi
July 5, 2025
I have ordered multiple Tasher 316SS fittings of different sizes and all have superb quality. There is no discernible difference from one fitting to another with regard to the quality of fabrication/machining. They are easy to install and are consistently problem free in tightening and drip free joints.Superb high accuracy machining of 316L material with no galling or tear outProsO Threading of adapter is flawless. No rough machining or galling marks of any kindO SS316 material allows use for saltwater environments or other highly corrosive environmentsO Each fitting is laser scribed as to its fitting dimensions ie 3/4” to 1/2” avoiding mix ups of inventoriesO Not the cheapest price wise but the quality provides maximum valueO Package even includes teflon tape to prevent SS to SS galling during fit-up (See picture)O NPT dimensions are accurate ie threads are tapered over the length of the threadAmazon picture shows five fittings but you can order different quantities ie, 2, 5 ....
Simon D
July 2, 2025
These fittings seem to be well made and have accurate clean threads which is obviously critical. I was able to screw in the fitting easily by hand and my schrader valve similarly was easy to screw in by hand leaving just a final tighten with wrenches.I haven't been able to use the pump that these are for yet, but I also liked the provision of the max PSI rating for the fitting. It's well above my needs for a 500 PSI connection. There's plenty of size options available so you should be able t get the right fitting for your application.
Fred Bloggs
May 15, 2025
Of course it does! Hence the name. I saw multiple different sizes were available on this seller’s page, but I can honestly only give my opinion on the size I got, ½” Male to 3/8” Female. I will say that if the other options are as well made as the one I got, then they are all good. The fact that they are made from 316L Stainless Steel makes them incredibly corrosion resistant. The fact that they are made by TAISHER makes them probably the best on the market. I have never purchased from this company and been disappointed.My size came with very sharp threads and look really sturdy. There are no tool-marks which is good.Compared to the big box stores, these are an absolute bargain.I recommend these reducers!
tj
May 9, 2025
I was super excited to get these to be able to easily add electric temp gauges to my old car and my old tractor. Then I was a little sad.Pros: Very solid construction, nice surface finish, no burrs, outside threads are on point.Cons: I was going to leave 3 stars, but that wouldn't be fair to the product as it is not explicitly listed for my use. It would have received 5 stars if not for this ONLY issue that I found. The center bored hole is smaller in diameter than the 1/8 NPT threads. I went to thread in a temp sensor and it would not go in. Now, with that said, I am fortunate enough to own a mill. It took me a few minutes to throw in the mill, grab the appropriate bit and enlarge the hole from the back until it reached the threaded portion. I am now able to thread the sensor in without issue.Overall: I think this is a quality product that just barely missed the mark by having the ID neck down slightly after the threaded portion. If you are using this just as a reducer you shouldn't have any issues. If you plan on using to thread in a temp sensor you might run into the same issue that I did and I would not want to try to enlarge that hole with just a drill and a benchtop vice.
Shaggy
March 18, 2025
I needed this to connect a quick-disconnect fitting to my gas pressure washer for the bypass hose. It worked perfectly and now I have a spare. The quality of these seems to be great. The threads were all cut well and there weren't any damaged threads on the set I received. I use my own blue sealing tape but otherwise, this is worth having.
Hippy Bryan
November 18, 2024
I liked the finish and stainless forging material which helps keep rust from getting into the water or dripping from the pump. It is a step up from galvanized steel or the PVC fitting I was using on my water pump inlet. The threads seemed cut well to me and sealed well after applying teflon tape to the fittings. What disappointed me was the unnecessary step after the threads on the small end which could restrict flow and prevent fully tightening pipe since it limits depth of penetration. Despite being tapered threads, it resembles the step on a compression fitting where a rubber washer gasket seals the face of the pipe/fitting. Maybe it is designed to function with dual threads like NPS or UNS or BSP? Anyways, my NPT male adapter fitting sealed up to it and didn't leak, but the extra restriction I would rather have avoided. I can't see any sign of this reducing step in the description, so thought I'd share some photos showing this machining anomaly/design decision.
Recommended Products