Your cart is empty.
Your cart is empty. Package Quantity: 63pcs
TIG Back Cap 3pcs:
1pcs 41V24 Long
1pcs 41V35 Middle
1pcs 41V33 Short
TIG Collets 10pcs:
2pcs 13N20 Collet .020"
2pcs 13N21 Collet .040"
2pcs 13N22 Collet 1/16"
2pcs 13N23 Collet 3/32"
2pcs 13N24 Collet 1/8"
1pcs 598882 Cup Gasket
1pcs 54N63-20
TIG Collet Body 5pcs :
1pcs 13N25 .020"
1pcs 13N26 0.040"
1pcs 13N27 1/16"
1pcs 13N28 3/32"
1pcs 13N29 1/8"
TIG Alumina nozzle 6pcs :
1pcs 13N08 1/4"-size 4
1pcs 13N09 5/16"-size 5
1pcs 13N10 3/8"-size 6
1pcs 13N11 7/16"-size 7
1pcs 13N12 1/2"-size 8
1pcs 13N13 5/8"-size 10
Long TIG Alumina nozzle 4pcs :
1pcs 796F70 D4.0mm x 1/6"-size 3L
1pcs 796F71 D6.5mm x 1/4"-size 4L
1pcs 796F72 D8.0mm x 5/16"-size 5L
1pcs 796F73 D9.50mm x 3/8"-size 6L
Extra Long TIG Alumina nozzle 5pcs:
1pcs 796F75 D6.5mm x 1/4"-size 4XL
1pcs 796F76 D8.0mm x 5/16"-size 5XL
1pcs 796F77 D9.50mm x 3/8"-size 6XL
1pcs 796F79 D6.5mm x 1/4"-size 4XL
TIG Collet Body Gas Lens 4pcs:
1pcs 45V42 ∮1.0 mm & 0.040"
1pcs 45V43∮1.6 mm & 1/16"
1pcs 45V44∮2.4 mm & 3/32"
1pcs 45V45∮3.2 mm & 1/8"
TIG Alumina nozzle Gas Lens 5pcs:
1pcs 53N58 D6.5mm x 1/4"-size 4
1pcs 53N59 D8.0mm x 5/16"-size 5
1pcs 53N60 D9.50mm x 3/8"-size 6
1pcs 53N61 D11.0mm x 7/16"-size 7
1pcs 53N61S D12.50mm x 1/2"-size 8
Long TIG Alumina nozzle 3pcs :
1pcs 53N59XL D8.0mm x 5/16"-size 5XL
1pcs 53N60XL D9.50mm x 3/8"-size 6XL
1pcs 53N61XL D11.0mm x 7/1"-size 7XL
Long TIG Collet Kit 4pcs
1pcs 13N21L 0.040"x 1-1/2" & 1.0mm x 40mm
1pcs 13N22L 1/16"x 1-1/2" & 1.6mm x 40mm
1pcs 13N23L 3/32"x 1-1/2" & 2.4mm x 40mm
1pcs 13N24L 1/8"x 1-1/2" & 3.2mm x 40mm
TIG Gas Lens Collet Bodies Large Diameter 4pcs
1pcs 45V204S 0.040"x 1-9/16" & 1.0mm x 40mm
1pcs 45V116S 1/16"x 1-9/16" & 1.6mm x 40mm
1pcs 45V64S 3/32"x 1-9/16" & 2.4mm x 40mm
Sierra
July 28, 2025
These fit my Lincoln square wave 175 tig perfectly and all the pieces I am able to use with my torch. Overall quality seems to be on par with what I can get from local weld shops. I will buy it again.
Johnny P
July 19, 2025
Works well on my Miller Tig
Dean Cotton
July 14, 2025
These work great for reasonable price
Matthew M.
July 11, 2025
I am a beginner TIG welder at Los Angeles Trade Technical College about to complete my A.S. in Welding.For the past few months, I have been welding with a traditional ceramic cup that comes with most machines and it has worked out fine. I bought this kit because I plan on specializing on TIG and I'm anticipating exotic metals.In class, I tested this kit on a Lincoln Precision TIG 275 with a wp20 water-cooled torch. I was welding 3/32" aluminum and using a green tipped tungsten.With traditional cups, I always noticed a red-ish color around the tungsten while the electricity is ionizing the argon gas. The red was from uneven flow which would usually go away once more amperage is applied. So it takes a little more amperage to get to the "sweet spot".With the gas lens, I never saw that red-ish color. The gas flow was perfectly even around the tungsten even at low amps. It also helped a little bit with arc stability and shielded the weld pool nicely.I played with stickout. Depending on angle, I got a half and inch stick out on a t-joint and was surprisingly able to get adequate gas coverage.With a closer or regular stickout, the arc is very stable and does not wander as much.This product is awesome. It will not make you a better welder. But if you plan on doing a lot of TIG welding just buy this right now.But it will give you the ability to weld more types of metals (the big cups I think are for titanium, stainless, chrome-moly, etc...), the ability to weld in tight places a little easier, and it will generally make your welds more consistent because the gas flow is consistent.
BoyLovesChips
May 22, 2025
Pretty impressive kit that has everything you'll need aside from tungsten. It comes in in resealable bags but no organizing tray to keep your parts separate. Used this to weld steel and so far it works great! Also this comes with both gas lens and collet body; I think this is a great kit to have around.
GroverD
April 29, 2025
I bought the 63 piece kit. The cups all look fine and there is an excellent assortment of them. I have had issues with the gas lenses. On them same torch, if I use a regular collet, it welds OK. But when I switch over to the gas lens, it welds like there is contamination. This is using a CK200-RG torch in a water cooled welder. My tungsten rods were burned to the tip.I did contact the manufacturer. Their did respond and were fairly quick on the response, but no resolution. I ended up purchasing CK gas lenses and the issue was resolved.
Sadia
April 17, 2025
this was the items required for the welder that i bought
Customer
April 16, 2025
The cups and gas lenses are of equal quality to the expensive name brands I use at work. They fit 9, and 20 style torches nicely and put out excellent gas coverage at nominal CFH. I would recomment upgrading the o-rings with viton if you are like me and run your torch a little hot. Great for air cooled torches up to 200 amps in my experience.
jack
April 11, 2025
souder stainless steel mince
gerardo
March 9, 2025
non si avvicinano minimamente a una qualità accettabile
stephen french
January 19, 2025
good value and delivered promptly
Ale
December 26, 2024
Rapporto qualità/prezzo davvero elevato. Spedizioni fulminee. Consigliato
Micha
November 15, 2024
Habe mir dieses umfangreiche Set zugelegt, weil ich einen neuen CK-Worldwide Brenner gekauft habe und dafür noch kein Zubehör hatte. Bisher bin ich mit den Bestandteilen zufrieden und bereue den Kauf nicht.Teilweise läuft das Gewinde etwas hakelig und das Plastik der Brennerkappen macht nicht den hochwertigsten Eindruck. WIG-Elektroden werden trotzdem sicher in den Spannhülsen gehalten, auch wenn mir mein Gefühl sagt, dass man diese nicht zu fest anziehen sollte.Hier gilt es aber auch den Preis zu bedenken. Es funktioniert alles und wenn man die Teile bei Binzel o.ä. bestellen würde, wäre man definitiv im dreistelligen Kostenbereich.Klare Kaufempfehlung.Ich würde die Teile wieder kaufen.
Recommended Products
