Your cart is empty.
Your cart is empty.Product Description
Elsie Pastor
July 30, 2025
Fit great and work great on my serge machine
PCox
July 29, 2025
Have not tried these yet. I came across them and I like having a good selection of twin needles on hand. I a later project planned for twin needle work ±P±
Tania
June 24, 2025
Me gustó mucho en especial para los dobladillo de las camisetas
Nolito Aquino
June 17, 2025
It worked fine when I hemmed my tshirt.
Mike
April 6, 2025
Works nice once you learn how to use it. As a bigger it was a little more challenging but not the needles fault
Abbey
March 23, 2025
Its a very nice set with many tools that I didn't previously have. I guess it assumes you already know how to use a double needle in your sewing machine. I haven't before so I would have appreciated some guidance on how to thread it with the bobbin and use. I ended up opting to not use it for the project I purchased it for because the research was taking too long. Its a nice set if you know what you're doing or take the time to research how to use them while you wait for them to arrive.
Barb
March 1, 2025
These needles aren't centered on the shank. They don't like up with the machine. Garbage.
Tiffany T
December 27, 2024
The twin needles are perfect for getting perfectly parallel seam lines. This set includes three different widths between the needles - 2, 3, and 4 mm. They fit my Singer machine like any regular needle. You’ll have to check your machine’s manual or manufacturer’s directions on how to thread the dual needle’s threads through your machine.I haven’t tried any of the presser feet, but the adjustable seam guide should come in handy. It’s a bit of a pain to adjust the width of the seam guide wall since it’s just a small roller and screw-threaded rod. You have to roll and roll and roll to get the guide’s edge from the narrowest to widest widths. I thought the moving part broke when rolling it back to the narrow width because the roller was getting impossible to roll. It turns out the plastic’s edge was running into the metal edge of the presser foot when it should have run under the metal foot in a groove made specifically to accommodate the plastic. The attachment type on these presser feet is a snap-on bar across the top. It’s not a shank-type attachment.There were no instructions included on how to use the items, so hopefully you can figure out how to use the presser feet and needles on your own.
Recommended Products